IOT-LAB

Run a Lorawan experiment

ssh vitalett@saclay.iot-lab.info 

git clone https://github.com/FreeRTOS/FreeRTOS-LTS.git
cd FreeRTOS-LTS/FreeRTOS
git clone https://github.com/Lora-net/LoRaMac-node.git
cd cd LoRaMac-node/

nano  src/boards/B-L072Z-LRWAN1/board.c

// change the baudrate to 115200 to be compatible with iot-lab serial 

UartConfig( &Uart2, RX_TX, 115200, UART_8_BIT, UART_1_STOP_BIT, NO_PARITY, NO_FLOW_CTRL );

nano src/peripherals/soft-se/se-identity.h

// update credentials to connect to TTN
#define STATIC_DEVICE_EUI       1
#define LORAWAN_DEVICE_EUI      LORAWAN_DEVICE_EUI_ON_TTN
#define LORAWAN_JOIN_EUI        LORAWAN_APP_EUI_ON_TTN
#define STATIC_DEVICE_ADDRESS   1
#define LORAWAN_DEVICE_ADDRESS  DEVICE_ADDRESS_TTN

.KeyID = NWK_KEY,           
.KeyValue = LORAWAN_APP_KEY_ON_TTN

mkdir build
cd build

cmake -DCMAKE_BUILD_TYPE=Release         -DTOOLCHAIN_PREFIX="/opt/gcc-arm-none-eabi-4_9-2015q1/"      -DCMAKE_TOOLCHAIN_FILE="../cmake/toolchain-arm-none-eabi.cmake"         -DAPPLICATION="LoRaMac"         -DSUB_PROJECT="periodic-uplink-lpp"         -DCLASSB_ENABLED="ON"         -DACTIVE_REGION="LORAMAC_REGION_EU868"         -DREGION_EU868="ON"         -DREGION_US915="OFF"         -DREGION_CN779="OFF"         -DREGION_EU433="OFF"         -DREGION_AU915="OFF"         -DREGION_AS923="OFF"         -DREGION_CN470="OFF"         -DREGION_KR920="OFF"         -DREGION_IN865="OFF"         -DREGION_RU864="OFF"         -DBOARD="B-L072Z-LRWAN1"       -DSECURE_ELEMENT="SOFT_SE"         -DSECURE_ELEMENT_PRE_PROVISIONED="OFF"         -DUSE_RADIO_DEBUG="ON" ..

make

cd src/apps/LoRaMac/

iotlab-experiment submit -n rtos_ttn -d 60 -l 1,archi=st-lrwan1:sx1276+site=saclay
{
    "id": 394774
}

iotlab-experiment get -i 394774 -s

iotlab-experiment get -i 394774 -r

iotlab-node --flash LoRaMac-periodic-uplink-lpp -l saclay,st-lrwan1,10

nc st-lrwan1-10 20000